BTX21-MP Cabled Bed and Chair Occupancy Alarm Controller with Nurse Call Connection
✓ Quick and easy plug and play fall prevention sensor alarm✓ Use with bed or chair sensors for rapid detection of a person on the move
✓ Integral transmitter signal to Medpage Caregiver alarm pagers
✓ Output/Input jack socket for nurse call switch or nurse call system connection
BTX21-MP provides a reliable alarm controller compatible with most bed and chair pressure mat alarm sensors. Some useful features including alarm pause, allow a patient to be turned or changed without raising an alarm. Alarm activation can be selected for instant (3-second delay) or delayed alarm selectable for 15 or 30 minutes. The controller will operate for 6 months on battery power (typical) and can be powered by optional mains power adaptor.
Key features
- Pressure sensor mat controller for fall prevention systems
- Quick and easy plug and play operation
- Compatible with Medpage/Easylink/TumbleCare sensors
- Instant or delayed alarm transmission selection
- Integral 433MHz alarm signal transmitter
- Compatible with Medpage/Easylink/Rondish caregiver pagers
- Comprehensive status monitoring indication LED
- Integral audible tone alarm with silent and volume selection options
- Available included in a kit for bed or chair leaving alarms
Technical Features (BTX21-MP Sensor Transmitter) |
---|
Sensor triggered transmitter |
Transmission frequency: 433MHz |
Transmission range: 75-150M |
Powered by 3 x AA 1.5V batteries |
DC power adaptor input: 6V @1 amp |
Output 6.33mm socket for nurse call connection |
Input 6.3mm socket for cabled nurse call switch |
Dimensions: 115mm x 75mm x 30mm |
Locking (screw) battery compartment |
Concealed external on/off switch |
Connector cable strain relief clamp |
Selectable alarm delay 2 seconds, 15 minutes |
Wall fixing bracket included |
BTX21-MP Cabled Bed and Chair Occupancy Alarm Controller with Nurse Call Connection
- Product Code: BTX21-MP
- Availability: In Stock
-
£60.73
- Ex Tax: £50.61